EPSP Automatic Vacuum Shape Moulding Machine - China Manufacturers, Suppliers, Factory

EPP Moulding Machine with mould, including the top model, referred to the bottom of the top die fixed installation has left and right sides is symmetrical distribution of two electric putter

Since 2012, NINGBO PinSheng machinery have passed the CE certification of UK and the IS09001-2008 quality management system certification. The company was recognized as a high-tech enterprise and The "Level A of honesty and trustworthiness "honor. The trademark of "Pinsheng" was come to be a well-known brand and demonstration. （China EPS machine)

An EPS machine is a comprehensive system designed for the production of Expandable Polystyrene (EPS) products. EPS is a remarkable material known for its exceptional insulating properties, low weight, and affordability. EPS machines facilitate the creation of a diverse range of EPS products by processing raw EPS material into desired shapes and forms.

EPS foam particles have excellent low temperature resistance (the lowest working temperature can reach -70℃ ~ -100℃) and excellent electrical insulation performance, but polyethylene is sensitive to environmental stress, chemical and mechanical effects, and has poor anti-aging performance. EPS foamed polyethylene is a white waxy translucent material, flexible and elastic, lighter than water, with superior dielectric properties, low water permeability and high organic vapor permeability. Under certain crystallinity, the transparency of polyethylene increases with the increase of molecular weight. Next, let Pinrise introduce you to where EPS foam can be applied:

The company specializes in the production of ETPU machine.PINSHENG brand competition strength, always walk in the forefront of the industry, its products sell well in more than 100 countries and domestic provinces and cities (autonomous regions).（China ETPU material)

The mold for foam molding is a plastic foam mold. The foamable resin is directly filled into the mold, heated and melted to form a gas-liquid saturated solution, through nucleation, a large number of tiny bubble nuclei are formed, and the nuclei grow to form a foam plastic part. There are three commonly used foaming methods: physical foaming, chemical foaming and mechanical foaming. Let's take a look at the design principle of the foaming mold. I hope it will be helpful to everyone's study!